- Sku:
Digital pH meter kit
Dhs. 70.00
Tax included.
Shipping calculated at checkout.
Just 1 left. Order soon!
Digital pH Meter Pen. The yellow handheld device features a black protective cap over the glass electrode sensor, an LCD screen, an ON/OFF button, and an automatic CAL (calibration) button.
pH Calibration Buffer Powders. The sachets on the left (such as pH 6.86 and pH 9.18 at 25°C) contain chemical powders used to calibrate the device for accurate readings. Each packet is meant to be dissolved in 250 ml of distilled water.
Common Uses
Drinking Water & Filtration. Checking the pH levels of tap water, bottled water, or reverse osmosis (RO) systems.
Pools & Spas. Monitoring water balance in swimming pools and hot tubs.
Aquariums & Hydroponics. Ensuring safe water conditions for fish tanks and nutrient solutions for plants.
Basic Operation & Calibration
Prepare Calibration Solutions. Dissolve each buffer powder packet into its own clean container with 250 ml of distilled or deionized water at 25°C (77°F).
Calibrate the Meter. Remove the black protective cap, rinse the glass tip with distilled water, and turn the meter on. Submerge the electrode into the pH 6.86 solution, press and hold the CAL button until the screen flashes 6.86, and wait for it to stabilize. Repeat with the pH 9.18 (and pH 4.01, if included) solutions as needed.
Test Your Liquid. Rinse the sensor with distilled water, dip it into the liquid you want to test (without going past the immersion line), gently swirl, and wait a few seconds for the digital reading to settle.

Digital pH meter kit
Dhs. 70.00

